State Less The Band Technology Site

Posts Tagged ‘data recovery’

S2s Ltd is a UK provider of network consulting and implementation services
that needed data protection to ensure business continuity, even in the event of a server breakdown.
s2s was previously using disk-to-tape to back up all the various systems the business was running on.
Backing up and recovering data was not only a very complicated and time-consuming process, it was also very unreliable. When retrieving data
from the tapes, once they had been delivered back to s2s, a lot of the data from the tapes was irretrievable.
SecurStore’s online solution automatically transfers data offsite in real-time, eliminating the risk of having backups located onsite in case of a disaster or loss of data during transportation to an offsite location. Data is transmitted and stored offsite in a state of the art data centre on a reliable disk subsystem, which is in turn duplicated and backed up onto a second disk sub-system located apart from the primary disk sub-system.
Due to the nature of the business, s2s runs on a variety of operating systems. Most of its servers are Linux-based and some of them are Mac-based,
because many s2s employees use Apple Macintosh machines. It also has the obligatory Windows applications and operates with a SAN architecture. SecurStore also needed to take into account the fact that most of the s2s servers are virtualised and that s2s already had a NAS (network-attached storage) system in place.
The backup service uses many defense mechanisms, such as strong
authentication, data encryption, password protection and client and
system side log legitimate users at s2s to perform a data recovery
when needed. Read the rest of this entry »

Technology has certainly come a long way in the past few decades. Gone are the huge contraptions that used to characterize computers. Nowadays, you can easily purchase a notebook computer that weighs in at less than 6 pounds. However, one thing hasn’t changed. Hard drives still occasionally crash and frustrated users are left trying to figure out just how to do hard drive data recovery on their own.

Hard drives aren’t perfect, although they’re amazing examples of mechanical engineering. Physical damage can easily occur since these disks are spinning at such high speeds. The smallest interference while in use can cause damage in certain areas. Various features have been put into place to reduce the likelihood of a critical hard drive failure, but these are not 100% effective. Sadly, physical damage isn’t the only reason why you may need to attempt hard drive data recovery. Many people accidentally wipe out their hard drives because they’re not sure what they’re doing.

If you do know a good deal about computers, and are not the one who messed up the hard drive in the first place, it may be possible for you to do your own hard drive data recovery. Keep in mind that to do this, you may need to fix your master boot record, or retrieve data from a physically damaged disk. If you can’t do this, then you’ll need to employ the services of a hard drive data recovery expert. Actually, if your system crashes and you don’t actually recover data for a living, I’d suggest you go straight to a hard drive data recovery expert. One thing though…they’re expensive. Come on, these guys are specialized in what they do. You didn’t really expect that any hard drive data recovery expert would do it for free, did you?
Read the rest of this entry »

Flash memory gets its name due to its microchip arrangement in such a way, that its section of memory cells gets erased in a single action or “Flash”.
Both NOR and NAND Flash memory were invented by Dr. Fujio Masuoka from Toshiba in 1984.The name ‘Flash’ was suggested because the erasure process of the memory contents reminds a flash of a camera, and it’s name was coined to express how much faster it could be erased “in a flash”. Dr. Masuoka presented the invention at the International Electron Devices Meeting (IEDM) held in San Jose, California in 1984 and Intel recognizes the potentiality of the invention and introduced the first commercial NOR type flash chip in 1988, with long erase and write times.

Flash memory is a form of non-volatile memory that can be electrically erased and rewrite, which means that it does not need power to maintain the data stored in the chip. In addition, flash memory offers fast read access times and better shock resistance than hard disks. These characteristics explain the popularity of flash memory for applications such as storage on battery-powered devices.

Flash memory is advance from of EEPROM (Electrically-Erasable Programmable Read-Only Memory) that allows multiple memory locations to be erased or written in one programming operation. Unlike an EPROM (Electrically Programmable Read-Only Memory) an EEPROM can be programmed and erased multiple times electrically. Normal EEPROM only allows one location at a time to be erased or written, meaning that flash can operate at higher effective speeds when the systems using; it read and write to different locations at the same time.

Referring to the type of logic gate used in each storage cell, Flash memory is built in two varieties and named as, NOR flash and NAND flash.
Flash memory stores one bit of information in an array of transistors, called “cells”, however recent flash memory devices referred as multi-level cell devices, can store more than 1 bit per cell depending on amount of electrons placed on the Floating Gate of a cell. NOR flash cell looks similar to semiconductor device like transistors, but it has two gates. First one is the control gate (CG) and the second one is a floating gate (FG) that is shield or insulated all around by an oxide layer. Because the FG is secluded by its shield oxide layer, electrons placed on it get trapped and data is stored within. On the other hand NAND Flash uses tunnel injection for writing and tunnel release for erasing.

NOR flash that was developed by Intel in 1988 with unique feature of long erase and write times and its endurance of erase cycles ranges from 10,000 to 100,000 makes it suitable for storage of program code that needs to be infrequently updated, like in digital camera and PDAs. Though, later cards demand moved towards the cheaper NAND flash; NOR-based flash is hitherto the source of all the removable media.

Followed in 1989 Samsung and Toshiba form NAND flash with higher density, lower cost per bit then NOR Flash with faster erase and write times, but it only allows sequence data access, not random like NOR Flash, which makes NAND Flash suitable for mass storage device such as memory cards. SmartMedia was first NAND-based removable media and numerous others are behind like MMC, Secure Digital, xD-Picture Cards and Memory Stick. Flash memory is frequently used to hold control code such as the basic input/output system (BIOS) in a computer. When BIOS needs to be changed (rewritten), the flash memory can be written to in block rather than byte sizes, making it simple to update.
On the other hand, flash memory is not practical to random access memory (RAM) as RAM needs to be addressable at the byte (not the block) level. Thus, it is used more as a hard drive than as a RAM. Because of this particular uniqueness, it is utilized with specifically-designed file systems which extend writes over the media and deal with the long erase times of NOR flash blocks. JFFS was the first file systems, outdated by JFFS2. Then YAFFS was released in 2003, dealing specifically with NAND flash, and JFFS2 was updated to support NAND flash too. Still, in practice most follows old FAT file system for compatibility purposes.
Read the rest of this entry »

When you store important information on a USB device, you take the chance of losing that information. Losing data on a USB can be kind of a mystery, but there are companies out there that can help you get that data back. These companies use engineering that can recover your lost data over ninety six percent of the time. These companies can even recover data that has been stored on a damaged USB device. So when you find yourself in a situation where you have lost valuable information you should not assume that this data can not be retrieved.

There are some companies that specialize in repairing damaged USB memory devices. In the process of retrieving your data, companies can also repair your device. Types of the problems they can repair broken solders, loose plugs, and broken internal connections. Some of the devices that they can fix are USB ports, USB sticks, USB drives, USB thumb drive, and Flash memory devices. These companies use a type of recovery called a jump drive recovery. They can recover any files from any type of USB drive or memory stick. Sometimes the chips inside the devices will be damaged, but don’t fret; there are some companies that can fix that problem too.
Read the rest of this entry »